Chapter 3: Operating the IP Handset
IP Handset menus
83
3333
O
p
er
at
ing the
IP
H
a
nd
se
t
To start and stop IP standard or streaming
connections set up in the BGAN terminal, do
as follows:
1. From the
BGAN
menu, select
Connect
.
2. Use the left/right keys to find the network
user group for the application you want
to start or stop.
3. Use the up/down keys to select the
connection you wish to start (Active) or
stop (Inactive).
4. Press
Start
to start a connection, or press
Stop
to stop the connection.
5. A confirmation window is displayed. Press
Yes
to continue.
The IP Handset sends a command to the
BGAN terminal to start or stop the
selected connection. Check the
IP Handset at regular intervals that the
connection is still running.
If the connection could not be started by
the BGAN terminal, the check mark will
be removed, the connection is inactive
and the command
Stop
has changed to
Start
.
For detailed information about using IP data
connections and setting up network user groups with standard and streaming
profiles refer to the terminal’s user manual.
Note
Optimize airtime and bandwidth usage
: You must manually stop the
connection when not used any longer. Note that you are charged for
the bandwidth used and the data transferred.
Summary of Contents for FleetBroadband
