TracPhone FleetBroadband, User Manual

Page: 74 / 146

Chapter 3: Operating the IP Handset
IP Handset menus 63
3333
O
p
er
at
ing the
IP
H
a
nd
se
t
4. Select Connect at the network you want
to connect to.
If your access point does not use
encryption, the handset will
automatically connect and create a new
profile for the access point.
5. If your access point uses encryption and
it is the first time you connect, you are
prompted for security settings, select
OK
to enter the Profiles menu. Set the
security settings as described in To
connect the IP Handset to the wireless
network
on page 62.
When the profile matches the access point, and you have selected Connect ,
the IP Handset attempts to establish a connection. If the access point is
connected to a BGAN terminal, see
Using a BGAN terminal on page 21 for
information on how to connect to the BGAN network.
When the IP Handset is ready for use, you see the handset ready symbol
in the top right corner of the display.
Normally a new profile is automatically created when you connect to an access
point.