Chapter 2: Getting started
24
Establishing a connection using BGAN terminal
•
In the web interface of the BGAN terminal.
The first IP Handset is automatically assigned user name 0501 and password
0501. Assign user name 0502 to 0516 and password 0502 to 0516 to further
IP Handsets.
To set up the user name and password for the IP Handset
To enter the user name and password in the IP Handset, do as follows:
1. Start up the IP Handset as described in the previous sections.
2. Enter the menu system and select
SIP
.
3. Move to the BGAN profile and select
Options
(left select key).
4. Select
Edit/View
.
5. Select
User name
and enter the user name for your handset. Note that the
user name must be the same as the local number for your handset when
using the BGAN terminal. Available numbers are 0501 to 0516.
6. Select
Password
and enter the password for your handset. Note this
password for later use in the terminal. You can use the local number as the
password as well, i.e. 0501 to 0516.
7. Exit the IP Handset menu.
To set up the BGAN terminal for additional IP Handsets
To match the IP Handset with the BGAN terminal you must enter the local
number and password for each IP Handset in the web interface of the BGAN
terminal.
To set up the BGAN terminal, do as follows:
1. Connect a computer to the LAN interface of the BGAN terminal and start up
your browser.
2. Enter the IP address for the terminal. The default IP address is 192.168.0.1.
The web interface opens.
3. Select
SETTINGS > IP handsets
.
Summary of Contents for FleetBroadband
