![Tracker Off-Road EViS 2020 Repair And Service Manual Download Page 96](http://html1.mh-extra.com/html/tracker-off-road/evis-2020/evis-2020_repair-and-service-manual_1147189096.webp)
B
82
Repair and Service Manual
SEATING AND OPS
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
10002660
OPS Lower Weldment Removal and Installa-
tion
NOTICE: Assistance may be required to remove the
lower OPS weldment.
Tool List
Qty.
Ratchet ........................................................................ 1
Socket, 10mm.............................................................. 1
Socket, 15mm.............................................................. 1
Wrench, 10mm ............................................................ 1
Wrench, 15mm ............................................................ 1
Wrench, 1/2””............................................................... 1
Torque Wrench, ft. lbs.................................................. 1
Torque Wrench, in. lbs................................................. 1
1.
Remove upper OPS frame from the lower OPS. (See
Upper OPS Frame Removal and Installation on
2.
Remove the back rest on the front seat. (See Front
Seat Removal and Installation on page 75)
3.
Remove the brush guard. (See Brush Guard
Removal and Installation on page 81)
4.
Remove the seat belts. (See Seat Belt Removal and
5.
Remove the front seat belt buckle. (See Front Seat
Belt Buckle Replacement on page 78)
6.
Loosen, but do not remove, the bolt (111) that
secures the upper portion of the lower OPS weld-
ment (110) (Ref. Fig. 13).
Fig. 13 Lower OPS Weldment (Upper Fastening)
7.
Remove the top bolt (124) from the restraint panel
(129).
8.
Remove the two lock nuts (125), bolts (121), restraint
panel (129), and bracket (128).
9.
Remove the lock nuts (126) and bolts (122).
10. Remove the lock nuts (127) and bolts (123) securing
the rear of the lower OPS weldment (110) (Ref. Fig.
14).
11. Have an assistant to support the front of the lower
OPS weldment.
12. Lift the rear of the lower OPS weldment (110) and
slide it toward the rear of the vehicle to release the
front bracket (115) from the bolt (111) (Ref. Fig. 13)
110
111
112
113
114
115
Front of Vehicle