B
ELECTRICAL
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
55
Repair and Service Manual
10002660
Winch Contactor Connections
Fig. 19 Winch Contactor Connections
Black cable
Blue wire
Grey wire ring terminal from the
winch harness to be left spare.
(Recommend wrapping in
elec tape And securing with
cable tie. Removing prior to
taping also acceptable.)
Connect red and black
contactor cables to + and -
driver side battery using nuts.
Red cable
Yellow wire
Connect red wire ring term from main harness
to red dot contactor stud.
Slide boots over cables prior to installation,
slide boots over studs after installation,
Torque to 3 - 4.5 Nm (26.6 - 39.8 in lbs)
Connect black wire Push-on terminal
from winch harness to black dot
tab on contactor.
Connect green wire Push-on terminal
from winch harness to green dot
tab on contactor.
