B
BODY
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
29
Repair and Service Manual
10002660
Fig. 10 Fender Replacement
Seat Wrap and Closeout Replacement
Tool List
Qty.
Drill .............................................................................. 1
Drill Bit ......................................................................... 1
Rivet Gun .................................................................... 1
Screwdriver, Phillips .................................................... 1
1.
Drill out the rivets (49) securing the seat wrap (40,
45) to the floor (41) and frame (Ref. Fig. 11). Retain
the hinge plates (47) for reuse during installation.
2.
Remove the 6 screws (42) connecting the front of the
seat wrap (40) to the sides (45).
3.
Pull the front portion (40) of the seat wrap out of the
vehicle.
4.
Remove the screws (46) connecting the seat wrap to
the frame from the inside of the side portions of the
seat wrap.
5.
Pull the side portions (45) of the seat wrap out of the
vehicle.
6.
If a closeout (48) needs to be replaced, remove the
two screws (44) attaching the closeout to the seat
Assemble in the reverse order of removal using new riv-
ets.
Fig. 11 Seat Wrap Replacement
35
36
30
38
39
Front of Vehicle
37
42
45
49
40
49
46
48
47
41
Front of Vehicle
49
49
