B
FAULT TESTING
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
115
Repair and Service Manual
10002660
“Braking Distance Captured” indicates the distance traveled by the vehicle
starting with the vehicle braking (initiated by throttle reversal, brake pot, VCL
Brake, or interlock braking) and ending when the motor RPM = 0. Units are
measured in feet.
“Distance Since Stop” shows the distance traveled by the vehicle starting
from a stop. In effect, the vehicle is used as a tape measure. In other words if
you travel 300 feet in forward and then 300 feet in reverse the distance would
be 600 feet. The distance is continuously updated and will stop and restart
when motor RPM = 0
“Diagnostics” is the next menu selection that can be viewed. If a fault is
detected at the time of testing, it will be viewed under “Present Errors.” See
Menu Guide for a list of faults.
“Present Errors” will show any active faults.
“Fault History” shows faults encountered by the controller in the past. Specif-
ics of when the fault occurred in run time hours can be viewed by selecting
each fault directly.
Fig. 8 Handheld Tool Function (Continued)
