Tracker Off-Road EViS 2020, Repair And Service Manual

Page: 90 / 154

B
76
Repair and Service Manual
SEATING AND OPS
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
10002660
4. Remove the bolts (33) and lock washers (34) fasten-
ing the seat back (32) to the seat back bracket (28).
5. Remove the lock nuts (31), flat washers (30), and
bolts (29) to remove the seat back brackets.
6. Remove the deck board fillers (40) (Ref. Fig. 3).
Fig. 3 Flip Seat Back Removal
7. Remove the lower seat belt support from the frame
(See Rear Seat Belt Buckle Removal on page 79).
8. Remove the four lock nuts (35), flat washers (20),
and bolts (19) to remove the seat bottom (18) (Ref.
Fig. 4).
Fig. 4 Seat Bottom Removal
9. Remove the bolts (42), flat washers (43), and lock
nuts (44) that secure the seat frame (41) to the main
frame of the vehicle (Ref. Fig. 5).
Fig. 5 Seat Frame
10. Remove bolts (21), flat washers (22), and lock nuts
(23) that secure the crossmember to the vehicle
frame.) (Ref. Fig. 4).
Assemble in the reverse order of removal.
Tighten hardware to torque values specified below.
32
28
33
29
30
34
30
31
40
40
Front of Vehicle
19
18
20
35
21
22
23
37
Front of Vehicle
Item Torque Specification
16, 31, 23, 44 21 - 25 ft. lbs. (28 - 34Nm)
33 44 - 55 in. lbs. (5 - 6 Nm)
35 9 - 11 ft. lbs (12 - 15 Nm)
42
41
43
44
Front of Vehicle