Printed in the Federal Republic of Germany
TR-Electronic GmbH 2016, All Rights Reserved
09/29/2020
TR-EMO-BA-GB-0022 v03
Page 151 of 153
13 EncoTRive RE - Accessories, Test Setup
13.1 Power supply cables with Solenoid Valve or M23 Connectors
Professional high quality shielded power supply cables
These cables are meant for connecting SELV power supplies with 4 mm banana jacks or terminals to
the drives. They are ready for use according to the pin assignments of the EncoTRive devices,
including a green-yellow line for PE.
Due to the shielding and the crimped contacts they are suitable for operation with high loads,
endurance tests and immunity and radiation tests according to the CE requirements.
TR-Material number, length and description:
P 0227-321
6m
7x2.5mm
2
, shielded, banana plugs 4 mm to M23 Speedcon 7-pin socket
P 0227-322
1m
4x2.5mm
2
, shielded, adapter cable M23 to solenoid valve 3+1 pin socket.
P 0227-323
2m
7x2.5mm
2
, shielded, banana plugs 4 mm to M23 Speedcon 7-pin socket
P 0227-324
6m
7x2.5mm
2
, shielded, crimped lugs to M23 Speedcon 7-pin socket.
P 0227-326
2m
7x2.5mm
2
, shielded, crimped lugs to M23 Speedcon 7-pin socket.
Tinkered sloppy unshielded power supply cable with 3+1 pin solenoid valve female connector
These cables are meant for connecting SELV power supplies with 4 mm banana jacks to the drives.
They must be tinkered by the user himself and are only applicable for quick tests on the the
workbench without heavy loads! Due to the missing cable shield the rig will exceed the limits for
radiated HF noise according to "EN 61800-3 Category C2", "CISPR 11" and "CISPR 16-1"!
TR-Material number, length/count and description:
64200161
2m
Cable "Lapp Ölflex" 3x 1.5mm
2
, unshielded, no PE!.
620001287
1
Banana plug 4 mm black for the common ground inlet.
620001288
2
Banana plug 4 mm red for the logic and power supply inlet.
620001364
1
Solenoid Valve Female Connector with 3+1 pins.
13.2 Test parameters for "EncoTRive RELC"
All parameters have the default values, with the following exceptions:
Max. current = 400 per thousand of the rated current
Max. profile velocity = 4100 vel. units
Profile velocity = 1200 vel. units
Position factor = 0x1000/360 (1 pos.unit = 1 degree)
Position range = -1024
*
360 .. +1024
*
360-1 = -368640..+368639 = 0xFFFA6000..0x00059FFF
Quickstop option code = 5
