TX-6610
1-Port Gigabit GPON Terminal User Guide
LAN
On
A device is connected to the LAN port.
Flashing
The LAN port is transmitting or receiving data.
Off
No device is connected to the LAN port.
1.3.2 The Back Panel
Figure 1-2
ON/OFF
: The switch for the power.
POWER
: The Power plug is where you will connect the power adapter.
RESET
: There are two ways to reset the Terminal's factory defaults.
Method one
: With the Terminal powered on, use a pin to press and hold the Reset button for
at least 5 seconds. And the Terminal will reboot to its factory default settings.
Method two
: Restore the default setting from
Management
Factory Defaults
of the
Terminal's Web-based utility.
GPON:
The GPON is where you will connect the fiber.
LAN:
Through the port, you can connect the Terminal to your PC or the other Ethernet
network devices.
3
