TX-6610
1-Port Gigabit GPON Terminal User Guide
Chapter 3. Quick Installation Guide
3.1 TCP/IP Configuration
After you directly connect your PC to the Terminal TX-6610 or connect your adapter to a
Hub/Switch which has connected to the Terminal, you need to configure your PC’s IP address. We
use the procedures in Windows 7 as an example, for other systems refer to
T4
for instructions.
Step 1:
Right-click
Network icon
(e.g. ) on the system tray, and select “
Open Network and
Sharing Center
>
Change adapter settings
”.
Step 2:
Right click the icon that showed below, select
Properties
on the prompt page.
Figure 3-1
6
