TX-6610
1-Port Gigabit GPON Terminal User Guide
Step 4:
Select both
Obtain an IP address automatically
and
Obtain DNS server address
automatically
. Then click
OK
.
Figure 3-3
Step 5:
Back to previous interface, click
OK
to save the settings.
Now, you can run the Ping command in the command prompt to verify the network connection.
Please click the
Start
menu on your desktop, select
run
tab, type
cmd or command
in the field
and press
Enter
. Type
ping 192.168.1.1
on the next screen, and then press
Enter
.
If the result displayed is similar to the screen below, the connection between your PC and the
Terminal has been established.
Figure 3-4
If the result displayed is similar to the screen shown below, it means that your PC has not
connected to the Terminal.
8
