TX-6610
1-Port Gigabit GPON Terminal User Guide
4) Click
Broadband (PPPoE)
.
5) Enter the
User name
and
Password
given by your ISP, and type a
Connection name
to
identify your connection, and then click
Connect
.
T2. How do I restore my Terminal to its factory default settings?
Once the Terminal is reset, the current settings will be lost and you will need to reconfigure it. We
strongly suggest you back up the current settings before resetting the Terminal.
With the Terminal powered on, press and hold the RESET button on the rear panel of the Terminal
until all LEDs turn back on momentarily, then release the button.
T3. What can I do if I forget my Terminal’s password?
Reset the Terminal first and then use the default username and password:
admin/admin
.
T4. How do I change my computer‘s setting to obtain an IP address automatically?
For Mac OS X
1) Click the
Apple icon
on the upper-left corner of the taskbar.
2) Go to
System Preferences
>
Network
.
3) Select
Ethernet
in the left panel.
4) Under
Configure IPv4
, select
Using DHCP
.
5) Click
Apply
.
For Windows 7/8/8.1
1) Right-click the
Network icon
(e.g.
) on the system tray and select
Open Network and
Sharing Center
>
Change adapter settings
.
2) Right-click the wired network connection (
Local Area Connection
or
Ethernet
by default) and
select
Properties
.
3) Double-click
Internet Protocol Version 4 (TCP/IPv4)
.
4) Select both
Obtain an IP address automatically
and
Obtain DNS server address
automatically
, then click
OK
.
5) Click
OK
again to save your configuration.
For Windows XP
1) Right-click the
Network icon
(e.g.
) on the system tray and select
Open Network
Connections
.
2) Right-click the wired network connection (
Local Area Connection
by default) and select
Properties
.
3) Double-click
Internet Protocol (TCP/IP)
.
4) Select both
Obtain an IP address automatically
and
Obtain DNS server address
automatically
, then click
OK
.
5) Click
OK
again to save your configuration.
21
