TP-Link TL-WA7110ND, User Manual

Page: 12 / 50

TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide
Chapter 1. Introduction
1.1 Overview of the Product
The TL-WA7110ND 150Mbps High Power Wireless Access Point will allow you to connect your
network with other wireless devices wirelessly, sharing Internet Access, files and fun, easily and
securely. The high power design will also help you build a more stable link or cover more area
indoors.
The TL-WA7110ND 150Mbps High Power Wireless Access Point provides 7 operation modes for
multi-user
to access the Internet: AP Client Router, AP Router, Access Point,
Multi-SSID, Repeater (Range Extender), Bridge with AP and Client. In AP Client Router mode,
it works as a WISP CPE and can access the Internet wirelessly via your WISP. In AP
Router
mode, it can access the Internet via an ADSL/Cable Modem, while sharing data
wirelessly.
With the most attentive wireless security, the TL-WA7110ND 150Mbps High Power
Wireless Access Point provides multiple protection measures. It can be set to turn off
wireless network name (SSID) broadcast so that only stations that have the SSID
can
be connected. The AP provides wireless LAN 64/128/152-bit WEP
encryption security, and WPA/WPA2 and WPA-PSK/WPA2-PSK authentication, as
well as TKIP/AES encryption security. It also supports VPN pass-through for sensitive data
secure transmission.
The TL-WA7110ND 150Mbps High Power Wireless Access Point complies with the IEEE 802.11n,
IEEE 802.11g and IEEE 802.11b standards so that the data transmission rate is up to 150Mbps.
The wireless transmission range can extend up to tens of kilometers.
1.2 Features
 Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3,
IEEE 802.3u standards.
 Wireless Data transfer rates up to 150Mbps.
 Supports AP Client Router, AP Router, Access Point, Multi-SSID, Repeater (Range Extender),
Bridge with AP and Client mode.
 High output transmit power and receive sensitivity optimized.

Supports Client Router Mode for WISP CPE.
 Supports passive power over Ethernet.
 Supports Wireless Distribution System (WDS).
 ACK timeout adjustment for long range transmission, up to 50km.
 Provides throughput monitor indicating the current wireless throughput.

Supports Layer 2 User Isolation.
 Supports Ping Watch Dog.
 Supports link speed test.
 Output transmit power adjustable.
 Supports PPPoE, Dynamic IP, Static IP Internet Access.
 Built-in NAT and DHCP server supporting static IP address distributing.
 Provides WLAN ACL (Access Control List).