TL-WA7110ND
150Mbps High Power Wireless Access Point User Guide
3.2.3
Access
Point
Figure 3-21 Finish page
When you choose
Access Point
on
Operation Mode
page in Figure 3-7, take the
following steps:
1.
Click
Next
in Figure 3-7, and then
Wireless
page will appear as shown in Figure 3-22. Create
an easy-to-remember
name
for
your
wireless
network. Select
Most
Secure
(WPA/WPA2-PSK)
mode and enter a wireless password below to prevent
unauthorized access to your AP. Then click
Next
.
Figure 3-22 Wireless
Wireless Network Name
- Enter a string of up to 32 characters. The same Name (SSID)
must be assigned to all wireless devices in your network. The default SSID is
set to be
TP-LINK _xxxxxx
(xxxxxx indicates the last unique six characters of
each Device's MAC address), which can ensure your wireless network security. But it is
recommended strongly that you change your networks name (SSID) to a different value. This
value is case-sensitive. For example,
MYSSID
is NOT the same as
MySsid
.
Region
- Select your region from the pull-down list. This field specifies the region where the
wireless function of the AP can be used. It may be illegal to use the wireless function of the AP
22
Summary of Contents for TL-WA7110ND
Page 1: ...TL WA7110ND 150Mbps High Power Wireless Access Point REV1 0 0 1910011047...
Page 22: ...11...
Page 30: ...18...
Page 48: ...35...
