TP-Link TL-WA7110ND, User Manual

Page: 40 / 50

TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide
3.2.5 Repeater (Range Extender)
When you choose Repeater (Range Extender) on Operation Mode page in Figure 3-7, take the
following steps:
1. Click Next in Figure 3-7, and then Wireless page will appear as shown in Figure 3-28. Click
Survey button to scan the wireless networks.
Figure 3-28 Wireless
 Enable WDS - The AP client can connect to AP with WDS enabled or disabled. If WDS is
enabled, all traffic from wired networks will be forwarded in the format of WDS frames consist
of four address fields. If WDS is disabled, three address frames are used. If your AP supports
WDS well, please select the option.

Repeater Mode - Choose mode for repeater.

WDS Repeater - In WDS Repeater mode, the AP with WDS enabled will relays data
to an associated root AP. AP function is enabled meanwhile. The wireless repeater
relays signal between its stations and the root AP for greater wireless range. Please
input the MAC address of root AP in the field
"MAC of AP" .

Universal Repeater - In Universal Repeater mode, the AP with WDS disabled will
relays data to an associated root AP. AP function is enabled
meanwhile. The wireless repeater relays signal between its stations and
the root AP for greater wireless range. Please input the MAC address of root
AP in the field
"MAC of AP" .
 Wireless Name of Root AP - The SSID of the AP your Device is going to connect to as a
client. You can also use the survey function to select the SSID to join.
 MAC Address of Root AP - The Mac Address of the AP your Device is going to connect to as
a client. You can also use the survey function to select the BSSID to join.
 Survey - Click this button, you can search the APs.
 Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the AP can be used. It may be illegal to use the wireless function of the AP
in a region other than one of those specified in this filed. If your country or region is not listed,
please contact your local government agency for assistance.
When you select your local region from the pull-down list, the Note Dialog of TERMS OF USE
will pop up. Select I agree to these terms of use , and click Accept to continue.
28