VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
161
designated port, they can transit their states to forwarding rapidly to reduce the
unnecessary forward delay.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable the STP function of Fast Ethernet port 1, and configure the Port Priority
as 64, ExtPath Cost as 100, IntPath Cost as 100, and then enable Edge Port:
VN/UN564:*%kpvgthceg"hcuvGvjgtpgv"
1/0/1
VN/UN564:*eqphki/kh+%urcppkpi/vtgg"
eqooqp/eqphki"
rqtv/rtkqtkv{
64
gzv/equv"
100
kpv/equv"
100
"rqtvhcuv"gpcdng"rqkpv/vq/rqkpv
open
urcppkpi/vtgg"oqfg"
Fguetkrvkqp"
The
urcppkpi/vtgg"oqfg
command is used to configure the STP mode of the
switch. To return to the default configurations, please use
pq" urcppkpi/vtgg"
oqfg"
command.
U{pvcz"
urcppkpi/vtgg"oqfg"
{stp | rstp | mstp}
pq"urcppkpi/vtgg"oqfg
Rctcogvgt"
stp —— Spanning Tree Protocol, the default value.
rstp —— Rapid Spanning Tree Protocol
mstp —— Multiple Spanning Tree Protocol
Eqoocpf"Oqfg"
Global Configuration Mode
"
Gzcorng"
Configure the spanning-tree mode as “mstp”:
"
VN/UN564:*%urcppkpi/vtgg"oqfg
mstp
