VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
78
nqiikpi"hkng"hncuj"
Fguetkrvkqp"
The
nqiikpi"hkng"hncuj
command is used to configure the level and the status of
the log file input. To disable the logging file flash funtion, please use
pq
nqiikpi"
hkng"hncuj"
command. The log file indicates the flash sector for saving system log.
The information in the log file will not be lost after the switch is restarted and can
be got by the
"
command.
"
U{pvcz"
nqiikpi"hkng"hncuj"
level
pq"nqiikpi"hkng"hncuj"
Rctcogvgt"
level
—— Severity level of the log information output to each channel.
"
There
are 8 severity levels marked with values 0-7. The smaller value has the higher
priority. Only the log with the same or smaller severity level value will be output.
By default, it is 4 indicating that the log information marked with 0~4 will be
saved in the log buffer.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable the log file function and set the severity as 7:
VN/UN564:*%nqiikpi"hkng"hncuj"
7
"
engct"nqiikpi"
Fguetkrvkqp"
The
"engct
nqiikpi
command is used to clear the information in the log buffer
and log file.
U{pvcz"
engct
nqiikpi"
[ buffer | flash ]
"
