VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
10
304" " ENK"Eqoocpf"Oqfgu"
The CLI is divided into different command modes: User EXEC Mode, Privileged EXEC Mode,
Global Configuration Mode, Interface Configuration Mode and VLAN Configuration Mode.
Interface Configuration Mode can also be divided into Interface fastEthernet, Interface
gigabitEthernet, Interface link-aggregation and some other modes, which is shown as the following
diagram.
The following table gives detailed information about the Accessing path, Prompt of each mode and
how to exit the current mode and access the next mode.
Oqfg"
Ceeguukpi"Rcvj"
Rtqorv"
Nqiqwv"qt"Ceeguu"vjg"pgzv"oqfg
User EXEC
Mode
Primary mode once it is
connected with the
switch.
VN/UN564:@"
Use the
gzkv"
command to disconnect the
switch (except that the switch is
connected through the Console port).
Use the
" gpcdng"
command to access
Privileged EXEC mode.
Privileged
EXEC Mode
Use the
gpcdng"
command to enter this
mode from User EXEC
mode.
VN/UN564:"%
Enter the
fkucdng
or the
gzkv
command to
return to User EXEC mode.
Enter
eqphkiwtg
command to access
Global Configuration mode.
Global
Configuration
Mode
Use the
eqphkiwtg"
command to enter this
mode from Privileged
EXEC mode.
VN/UN564:*%
Use the
gzkv"
or the
gpf
command or
press
Evtn-\
to return to Privileged
EXEC mode.
Use the
kpvgthceg
hcuvGvjgtpgv
/
ikicdkvGvjgtpgv"
port
or
kpvgthceg
tcpig"
hcuvGvjgtpgv
/
ikicdkvGvjgtpgv"
port-list
command to access interface
Configuration mode.
Use the
xncp"
vlan-list
to access VLAN
Configuration mode.
Interface
Configuration
Mode
Use the
kpvgthceg
hcuvGvjgtpgv
/
ikicdkvGvj
gtpgv"
port
or
kpvgthceg
tcpig"
hcuvGvjgtpgv
/
ikicdkvGvjgtpgv"
port-list
command to enter this
mode from Global
Configuration mode.
VN/UN564:*eqphki/kh+%
VN/UN564:*eqphki/kh/"
tcpig+%
Use the
gpf"
command or press
Evtn-\
to
return to Privileged EXEC mode.
Enter
gzkv"
or
" %"
command to return to
Global Configuration mode.
A port number must be specified in the
kpvgthceg"
command.
