VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
121
Gzcorng"
Specify the storm control rate as 2Mbps for port5:
VN/UN564:*%
interface fastEthernet 1/0/5
VN/UN564:*eqphki/kh+%
storm-control rate 2m
"
dcpfykfvj"
Fguetkrvkqp"
The
" dcpfykfvj"
command is used to configure the bandwidth limit for an
Ethernet port. To disable the bandwidth limit, please use
pq" dcpfykfvj"
command.
U{pvcz"
dcpfykfvj"
{ [
kpitguu
ingress-rate
] [
gitguu
egress-rate
] }
pq"dcpfykfvj"
{ all | ingress | egress }
"
Rctcogvgt
ingress-rate
——Specify the bandwidth for receiving packets. Range: 1-102400
for the megaport, 1-1024000 for the gigaport.
egress-rate
—— Specify the bandwidth for sending packets. Range:1-102400
for the megaport, 1-1024000 for the gigaport.
all | ingress | egress —— Disable the bandwidth limitation function on the
specified packet type. “all” indicates the bandwidth limitation on receiving and
sending packets is disabled; “ingress” indicates the bandwidth limitation on
receiving packets is diabled; “egress” indicates the bandwidth limitation on
sending packets is disabled.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Configure the ingress-rate as 5120Kbps and egress-rate as 1024Kbps for Fast
Ethernet port 5:
VN/UN564:*%kpvgthceg"hcuvGvjgtpgv"
1/0/5
VN/UN564:*eqphki/kh+%dcpfykfvj"kpitguu
5120
gitguu
1024
"
