VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
93
deleted manually. The learned entries will be cleared after the switch is rebooted.
When permanent mode is selected, the learned MAC address will be out of the
influence of the aging time and can only be deleted manually too. However, the
learned entries will be saved even the switch is rebooted.
status —— Enable or disable the Port Security function for a specified port. By
default, this function is disabled.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable Port Security function for Fast Ethernet port 1, select Static mode as the
learn mode, and specify the maximum number of MAC addresses that can be
learned on this port as 30:
VN/UN564:*%kpvgthceg"hcuvGvjgtpgv"
1/0/1
"
VN/UN564:*eqphki/kh+%oce" cfftguu/vcdng" ocz/oce/eqwpv
ocz/pwodgt"
30
oqfg"
static
uvcvwu
enable
"
ujqy"oce"cfftguu/vcdng"cfftguu"
Fguetkrvkqp"
The
" ujqy" oce" cfftguu/vcdng" cfftguu"
command is used to display the
information of all address entries.
U{pvcz"
ujqy"oce"cfftguu/vcdng
cfftguu
{dynamic | static | drop | all }
Rctcogvgt"
dynamic | static | drop | all —— The type of your desired entry.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the information of all address entries:
VN/UN564:*%ujqy"oce"cfftguu/vcdng"cfftguu"
all
"
