VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
109
vtcegtv"
Fguetkrvkqp"
The
vtcegtv"
command is used to test the connectivity of the gateways during its
journey from the source to destination of the test data.
U{pvcz"
vtcegtv
{
ip_address
} [-w {
waitTime
} ] [-h {
maxHops
} ]
Rctcogvgt"
ip_address
—— The IP address of the destination device.
waitTime
—— The maximum time for the test data to wait before timeout. It
ranges from 1 to 10000ms.
maxHops
—— The maximum number of the route hops the test data can pass
though. It ranges from 1 to 30. By default, this value is 4.
Eqoocpf"Oqfg"
User EXEC Mode and Privileged EXEC Mode
Gzcorng"
Test the connectivity between the switch and the network device with the IP
192.168.0.131. If the destination device has not been found after 20
maxHops
,
the connection between the switch and the destination device is failed to
establish:
VN/UN564:%vtcegtv"
192.168.0.131 –h 20
"
nqqrdcem"kpvgthceg"
Fguetkrvkqp"
The
nqqrdcem"kpvgthceg"
command is used to test whether the port is available
or not.
U{pvcz"
nqqrdcem" kpvgthceg"
{
hcuvGvjgtpgv
port
|
ikicdkvGvjgtpgv
port
} { internal |
external }
Rctcogvgt"
port
—— The Fast/Gigabit Ethernet port number.
internal | external
—— Loopback Type. There are two options: “internal” and
“external”.
