54
Chapter 11
Customize Your Network Settings
3 ) In the
IPSec Connection Name
column, specify a name.
4 ) In the
Remote IPSec Gateway (URL)
column, Enter Site B’s WAN IP address.
5 ) To configure
Site A’s LAN
:
In the
Tunnel access from local IP addresses
column, here we take
Subnet Address
as an
example. Then input the LAN IP range of Site A in the
IP Address for VPN
column, and input
Subnet Mask
of Site A.
6 ) To configure
Site B’s LAN
:
In the
Tunnel access from remote IP addresses
column, here we take
Subnet Address
as an
example. Then input the LAN IP range of Site B in the
IP Address for VPN
column, and input
Subnet Mask
of Site B.
7 ) Select the
Key Exchange Method
for the policy. We select
Auto(IKE)
here.
8 ) Enter the
Pre-Shared Key
for IKE authentication. Then keep
Perfect Forward Secrecy
enabled.
Note:
•
The key should consist of visible characters without blank space.
•
Make sure Site A and Site B use the same key.
