40
Chapter 10
Network Security
Tips:
The level of protection is based on the traffic packets number. The protection will be triggered immediately when the
number of packets exceeds the preset threshold value (the value can be set on
Advanced
>
System Tools
>
System
Parameters
>
DoS Protection Level Settings
), and the vicious host will be displayed in the
Blocked DoS Host List
.
5. Select
Forbid Lan Ping
if you want to ignore the ping packets from LAN port.
6. Select
Forbid Wan Ping
if you want to ignore the ping packets from WAN port.
7. Click
Save
to make the settings effective.
10. 2. Access Control
Access Control is used to block or allow specific client devices to access your network (via wired or wireless) based on a list of
blocked devices (Blacklist) or a list of allowed devices (Whitelist).
Block or allow specific client devices to access my network (via wired or wireless).
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the router.
2. Go to
Advanced
>
Security
>
Access Control
.
3. Enable
Access Control
.
4. Select the access mode to either block (recommended) or allow the device(s) in the list.
To block specific device(s)
1 ) Select
Blacklist
.
2 ) Select the device(s) to be blocked in the
Devices Online
table.
3 ) Click
Block
above the
Devices Online
table. The selected devices will be added to
Devices in
Blacklist
automatically.
I want to:
How can I
do that?
