40
Chapter 6
2. Go to
Advanced
>
System Tools
>
Ping Watchdog
and complete the settings according
to your needs.
3. Select the
Ping Watchdog
checkbox to enable the function.
4. Enter the IP address of the target host in
IP Address To Ping
field that you want to
send ping packets to.
5. Enter the time interval (in seconds) between two continuous ping packets in
Ping
Interval
field.
6. Enter the time delay (in seconds) before the first ping packet is sent out when the
device is restarted in
Startup Delay
field.
7. Enter a number of ping count(s) that the device can send continously in
Fail Count To
Reboot
field. If the value is exceeded, the device will restart automatically.
8. Click
Save
.
6. 10. LEDs Control
The LEDs indicate AP device’s activities and behavior. You can turn on or turn off the AP
device’s LEDs from the web-based management page.
1. Visit
http://tplinkap.net
, and log in with the username and password you set for the
AP device.
2. Click the
LED On
or
LED Off
icon on the top right corner of the page. The icon
displays that the LEDs is on and you can click it to turn off the LEDs. The icon
displays that the LEDs is off and you can click it to turn on the LEDs.
