Toyota SEQUOIA 2007 Owner'S Manual Download Page 94

Page: 94 / 484

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

u13020

The driver and front passenger seat

belt pretensioners are designed to be

activated in response to a severe fron-

tal impact. The pretensioners are also

activated during vehicle rollover.

When the sensor detects a severe frontal

impact or a vehicle rollover, the front seat
belts are quickly drawn back by the re-

tractors so that the belts snugly restrain

the occupants.

The front passenger’s seat belt pretension-

er will not activate if no passenger is

detected in the front passenger seat by
the front passenger occupant classification

system. However, the front passenger’s

seat belt pretensioner may activate if lug-
gage is put on the seat, or the seat belt

is buckled up regardless of the presence

of an occupant in the seat. (As for the
front passenger occupant classification

system, see “Front passenger occupant

classification system” on page 103 in this
Section.)
The seat belt pretensioners and SRS air-

bags may not operate together in all colli-
sions.

u13228

The seat belt pretensioners will not oper-

ate in a vehicle rollover if the “RSCA
OFF” indicator light is on. For details, see

“Roll sensing of curtain shield airbags off

switch” on page 107 in this Section.

07 05.22

—Seat belt pretensioners

Summary of Contents for SEQUOIA 2007





































































































































































































































































































































































































































































































Search results

Summary of Contents for SEQUOIA 2007

Reviews:

Toyota SEQUOIA 2007, Owner'S Manual, Page: 94 / 484

Search results

Summary of Contents for SEQUOIA 2007

Reviews: