Toyota SEQUOIA 2007 Owner'S Manual Download Page 32 | Manualshive

Page: 32 / 484

Toyota SEQUOIA 2007 Owner'S Manual Download Page 32

22

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

u12066

To open the back window, push the

back window open switch of the trans-
mitter for about 1 second. The window

will fully open.

At this time, you can hear a beep.
If the ignition switch is in the “ON” posi-

tion,  the  back  window  cannot  be  opened
by  the  back  window  open  switch.
To  open  the  back  window  with  the  master
key,  see  “Power  back  window”  on  page  32

in  this  Section.
The  back  window  opening  program  by
wireless  remote  control  can  be  changed  or

disabled. For details, contact your Toyota

dealer.

u12016

Pushing the “PANIC” switch blows the

horn intermittently and flashes the
headlights and tail lights.

The “PANIC” switch is used to deter ve-
hicle theft when you witness anyone at-

tempting to break into or damage your

vehicle.
The alarm will last for one minute. To stop

alarm midway, push the “PANIC” or

“UNLOCK” switch, or unlock any side door
or back door with key. You can also stop

the alarm by turning the ignition key from

“LOCK” to the “ON” position.

The “PANIC” mode does not work when

the  ignition  key  is  in  the  “ON”  position.
This  alarm  function  can  be  disabled.  For
details,  contact  your  Toyota  dealer.

07 05.22

—Opening back window

—Activating panic mode

«
...
30
31
32
33
34
...
»

Summary of Contents for SEQUOIA 2007





































































































































































































































































































































































































































































































Reviews:

No comments