Toyota SEQUOIA 2007 Owner'S Manual Download Page 56

Page: 56 / 484

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

While adjusting the seat, do not put
your hands under the seat or near

the moving parts. Otherwise, your

hands or fingers may be caught and
injured.

u13266

1. SEAT POSITION ADJUSTING LEVER

Hold the center of the lever and pull it

up. Then slide the seat to the desired
position with slight body pressure and

release the lever.

2. SEAT CUSHION HEIGHT ADJUSTING

LEVER

Pull up or push down the lever.

3. SEATBACK

ANGLE

ADJUSTING

LEVER

Lean forward and pull the lever up.

Then lean back to the desired angle

and release the lever.

07 05.22

—Adjusting front seats

(manual seat)

Summary of Contents for SEQUOIA 2007





































































































































































































































































































































































































































































































Search results

Summary of Contents for SEQUOIA 2007

Reviews:

Toyota SEQUOIA 2007, Owner'S Manual, Page: 56 / 484

Search results

Summary of Contents for SEQUOIA 2007

Reviews: