Toyota SEQUOIA 2007 Owner'S Manual Download Page 123

Page: 123 / 484

113

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

u13080

2. Fully extend the shoulder belt to put it

in the lock mode. When the belt is
then retracted even slightly, it cannot

be extended.

To hold the infant seat securely, make

sure the belt is in the lock mode before

letting the belt retract.

u13081

3. While pressing the infant seat firmly

against the seat cushion and seatback,
let the shoulder belt retract as far as

it will go to hold the infant seat secure-

ly.

u13082

CAUTION

Push and pull the child restraint sys-
tem in different directions to be sure

it is secure. Follow all the installation

instructions provided by its manufac-
turer.

07 05.22

Summary of Contents for SEQUOIA 2007





































































































































































































































































































































































































































































































Search results

Summary of Contents for SEQUOIA 2007

Reviews:

Toyota SEQUOIA 2007, Owner'S Manual, Page: 123 / 484

Search results

Summary of Contents for SEQUOIA 2007

Reviews: