Toyota SEQUOIA 2007 Owner'S Manual Download Page 241

Page: 241 / 484

232

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

u17006

BEFORE USING THE CONTROLLER

(for new vehicle owners)
A battery is already set in the control-

ler with an insulating sheet, which pre-
vents the battery from being dis-

charged. Before using the controller,

remove the insulating sheet.

u17023

USING THE CONTROLLER
To use the rear seat audio system con-

troller, direct the signal output portion
of the controller to the signal reception

portion of the rear seat audio system

display.

The rear seat audio system controller can

be  operated  when  the  ignition  switch  is  in
the  “ACC”  or  “ON”  position.
The  controller  does  not  operate  properly

when the signal reception portion of the
display is exposed to direct sunlight.

Block the display from direct sunlight.
Details of specific buttons, controls, and

features

the

controller,

see

“CONTROLLER FEATURES” on page 234
in this Section.

NOTICE

Observe the followings, otherwise the
controller may be damaged.

Do not drop or strongly knock the

controller against hard objects.

Do not sit on or place heavy ob-

jects on the controller.

07 05.22

Summary of Contents for SEQUOIA 2007





































































































































































































































































































































































































































































































Search results

Summary of Contents for SEQUOIA 2007

Reviews:

Toyota SEQUOIA 2007, Owner'S Manual, Page: 241 / 484

Search results

Summary of Contents for SEQUOIA 2007

Reviews: