Toyota SEQUOIA 2007 Owner'S Manual Download Page 135

Page: 135 / 484

125

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

u13210

TO USE THE ANCHOR BRACKETS:

1. Remove the head restraint.

u13211

2. Fix the child restraint system with

the seat belt.
Latch the hook onto the anchor

bracket and tighten the top strap.

For instructions to install the child re-

straint system, see “Child restraint” on

page 108 in this Section.

CAUTION

Make sure the top strap is securely
latched, and check that the child re-

straint system is secure by pushing

and pulling it in different directions.
Follow all the installation instructions

provided by its manufacturer.

u13212

3. Replace the head restraint.

07 05.22

Summary of Contents for SEQUOIA 2007





































































































































































































































































































































































































































































































Search results

Summary of Contents for SEQUOIA 2007

Reviews:

Toyota SEQUOIA 2007, Owner'S Manual, Page: 135 / 484

Search results

Summary of Contents for SEQUOIA 2007

Reviews: