Toyota SEQUOIA 2007 Owner'S Manual Download Page 55

Page: 55 / 484

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

Front passenger seat

CAUTION

The SRS front passenger airbag also
deploys with considerable force, and

can cause death or serious injury es-

pecially if the front passenger is very
close to the airbag. The front passen-

ger seat should be as far from the

airbag as possible with the seatback
adjusted, so the front passenger sits

upright.

Front seats

CAUTION

The SRS side airbags are installed in
the driver and front passenger seats.

Observe the following precautions.

Do not lean against the front door
when the vehicle is in use, since

the side airbag inflates with consid-

erable speed and force. Otherwise,
you may be killed or seriously in-

jured.

Do not use seat accessories which

cover the area where the side air-

bags inflate. Such accessories may
prevent the side airbags from acti-

vating correctly, causing death or

serious injury.

Do not modify or replace the seats

or upholstery of the seats with side
airbags. Such change may prevent

the side airbag system from activat-

ing correctly, disable the system or
cause the side airbags to inflate ac-

cidentally, resulting in death or seri-

ous injury.

CAUTION

Do not adjust the seat while the
vehicle is moving as the seat may

unexpectedly move and cause the

driver to lose control of the vehicle.

Be careful that the seat does not

hit a passenger or luggage.

After adjusting the seat position, re-

lease the lever and try sliding the

seat forward and backward to make
sure it is locked in position.

After adjusting the seatback, push

your body back against the seat to
make sure the seat is locked in

position.

Do not put objects under the seats.

Otherwise, the objects may interfere

with the seat

−

lock mechanism or

unexpectedly push up the seat posi-

tion adjusting lever and the seat

may suddenly move, causing the
driver to lose control of the vehicle.

07 05.22

—Seat adjustment precautions

Summary of Contents for SEQUOIA 2007





































































































































































































































































































































































































































































































Search results

Summary of Contents for SEQUOIA 2007

Reviews:

Toyota SEQUOIA 2007, Owner'S Manual, Page: 55 / 484

Search results

Summary of Contents for SEQUOIA 2007

Reviews: