Toyota SEQUOIA 2007 Owner'S Manual Download Page 76

Page: 76 / 484

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

u13184

2. Lower the outside head restraint to

the lowest position.

u13185

From front

From rear

3. Move the seat to the rear

−

most posi-

tion. Unlock the seatback and fold it

down.

CAUTION

Make sure people or luggage are
clear from the seat. Then, hold the

seat and slowly move it. Otherwise,

people may be injured or luggage
may be damaged, if the seat hits

them.

07 05.22

Summary of Contents for SEQUOIA 2007





































































































































































































































































































































































































































































































Search results

Summary of Contents for SEQUOIA 2007

Reviews:

Toyota SEQUOIA 2007, Owner'S Manual, Page: 76 / 484

Search results

Summary of Contents for SEQUOIA 2007

Reviews: