Toyota SEQUOIA 2007 Owner'S Manual Download Page 473

Page: 473 / 484

464

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

Oil grade:

ILSAC multigrade engine oil

Recommended oil viscosity:

SAE 5W

−

OIL008

Outside temperature

Please contact your Toyota dealer for fur-

ther details.

COOLING SYSTEM

Total capacity, L (qt., Imp. qt.):

With rear heater

14.5 (15.3, 12.8)

Without rear heater

12.8 (13.5, 11.3)

Coolant type:

“Toyota Super Long Life Coolant” is

used in your Toyota vehicle at factory

fill. In order to avoid technical problems,
only use “Toyota Super Long Life

Coolant” or similar high quality ethylene

glycol based non

−

silicate, non

−

amine,

non

−

nitrite, and non

−

borate coolant with

long

−

life hybrid organic acid technology.

(Coolant with long

−

life hybrid organic

acid technology is a combination of low

phosphates  and  organic  acids.)
Do  not  use  plain  water  alone.
Please  contact  your  Toyota  dealer  for
further  details.

BATTERY

Open voltage

∗

at 20

C (68

F):

12.6—12.8 V

Fully charged

12.2—12.4 V

Half charged

11.8—12.0 V

Discharged

∗

: Voltage that is checked 20 minutes af-

ter the key is removed with all the
lights turned off

Charging rates:

5 A max.

AUTOMATIC TRANSMISSION

Fluid capacity (drain and refill),

L (qt., Imp. qt.):

Up to 3.0 (3.2, 2.6)

Fluid type:

Toyota Genuine ATF WS

Change automatic transmission fluid only

as necessary.
Generally, it is necessary to change

automatic transmission fluid only if your
vehicle is driven under one of the Special

Operating Conditions

listed

in your

“Scheduled

Maintenance

Guide”

“Owner’s Manual Supplement”. When

changing the automatic transmission fluid,

use only “Toyota Genuine ATF WS” (ATF
JWS3324 or NWS9638) to aid in assuring

optimum transmission performance.

Notice: Using automatic transmission

fluid other than “Toyota Genuine ATF

WS” may cause deterioration in shift
quality, locking up of your transmission

accompanied by vibration, and ultimate-

ly damage the automatic transmission
of your vehicle.

Please contact your Toyota dealer for fur-

ther details.

07 05.22

Summary of Contents for SEQUOIA 2007





































































































































































































































































































































































































































































































Search results

Summary of Contents for SEQUOIA 2007

Reviews:

Toyota SEQUOIA 2007, Owner'S Manual, Page: 473 / 484

Search results

Summary of Contents for SEQUOIA 2007

Reviews: