Toyota SEQUOIA 2007 Owner'S Manual Download Page 304

Page: 304 / 484

295

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

“AUTO” button

For automatic operation of the air condi-

tioning, press the “AUTO” button. An indi-
cator light will illuminate to show that the

automatic operation mode has been se-

lected.
In the automatic operation mode, the air

conditioning selects the most suitable fan
speed and air flow, on

−

off of the air condi-

tioning and air intake according to the

temperature.
When you press the “AUTO” button with

the air intake mode at FRESH, internal

circulation  may  be  applied  for  maximum
cooling.
When  you  adjust  the  temperature  selector
to  maximum  cooling,  a  “MAX.  COLD”  mes-

sage will appear on the display and the

air  intake  mode  will  be  automatically
changed  to  RECIRCULATE.
You  may  use  manual  controls  if  you  want
to  select  your  own  settings.

In the default mode, air intake changes in

accordance with the temperature when the

automatic operation mode is selected. This
feature can be disabled by doing the fol-

lowing:

Turn the ignition switch to “ACC” or
“LOCK”. Turn the ignition switch to the

“ON” position while pressing the “AUTO”

and “OFF” buttons at the same time.
When the automatic operation of the air

intake mode is disabled, it may affect the

cooling performance. You can set the de-
fault mode by the following:

Turn the ignition switch to “ACC” or

“LOCK”. Turn the ignition switch to the
“ON” position while pressing the wind-

shield air flow button and “OFF” button at

the same time.

Fan speed selector

Turn the knob to adjust the fan speed—to

the right to increase, to the left to de-

crease.
In automatic operation, the fan speed is

adjusted automatically unless you desire

another fan speed mode.

Temperature selector

Turn the knob to adjust the temperatu-

re—to the right to warm, to the left to
cool.
The temperature display changes between
“

C” and “

F” when the unit of the outside

temperature display is changed. (For de-

tails, see “Multi

−

information display” on

page 306 in Section 1

−

10.)

“OFF” button

Push the button to turn off the air condi-

tioning system.

07 05.22

Summary of Contents for SEQUOIA 2007





































































































































































































































































































































































































































































































Search results

Summary of Contents for SEQUOIA 2007

Reviews:

Toyota SEQUOIA 2007, Owner'S Manual, Page: 304 / 484

Search results

Summary of Contents for SEQUOIA 2007

Reviews: