Toyota PASEO 1999 Owner'S Manual Download Page 26

Page: 26 / 215

’99 MY PASEO (U)

3. Fold the stowage bag in half and

zip. Put the stowage belt through the
retaining clip.

Caution label

4. Put the stowage bag in the trunk

room. Then attach the hooks to the
stowage anchor.

When putting the stowage bag in the trunk

room, be sure the side attached the cau-

tion label facing upward.

CAUTION

Be sure to place the moon roof cor-
rectly. Placing incorrectly may
cause a damage and possibly per-
sonal injury.

Make sure both hooks are securely
attached to the stowage anchor.

NOTICE

Be sure that the luggages in the
trunk room do not hit on the
stowed moon roof.

To avoid damaging the moon roof,
do not press on the center of the
stowed moon roof and do not place
anything heavy on the stowed moon
roof.

Summary of Contents for PASEO 1999
























































































































































































































Search results

Summary of Contents for PASEO 1999

Reviews:

Related manuals for PASEO 1999

Brands by name

Popular brands

Toyota PASEO 1999, Owner'S Manual

Search results

Summary of Contents for PASEO 1999

Reviews:

Related manuals for PASEO 1999

Brands by name

Popular brands