Toyota PASEO 1999 Owner'S Manual Download Page 57

Page: 57 / 215

’99 MY PASEO (U)

This SRS airbag system has a service

reminder indicator to inform the driver of

operating problems. If either of the follow-

ing conditions occurs, this indicates a mal-

function of the airbag. Contact your Toyota

dealer as soon as possible to service the

vehicle.

The light does not come on when the

ignition key is turned to the ”ACC” or

”ON” position, or remains on.

The light comes on while driving.

In the following cases, contact your Toyota

dealer as soon as possible:

The SRS airbag has been inflated.

The front part of the vehicle (shaded

in the illustration) was involved in an

accident not of the extent to cause the

SRS airbag to inflate.

The pad section of the steering wheel

(shaded in the illustration) is scratched,

cracked, or otherwise damaged.

NOTICE

Do not disconnect the battery cables
before contacting your Toyota dealer.

Summary of Contents for PASEO 1999
























































































































































































































Search results

Summary of Contents for PASEO 1999

Reviews:

Related manuals for PASEO 1999

Brands by name

Popular brands

Toyota PASEO 1999, Owner'S Manual

Search results

Summary of Contents for PASEO 1999

Reviews:

Related manuals for PASEO 1999

Brands by name

Popular brands