Toyota PASEO 1999 Owner'S Manual Download Page 19

Page: 19 / 215

’99 MY PASEO (U)

This system deactivates the lock re-
lease lever so that things locked in the
trunk can be protected.

1. Push down the security lock lever to

lock the rear seatback.

After locking the rear seatback, try folding

it down to make sure they are securely

locked, otherwise someone could get into

the trunk by folding down a rear seat.

2. After closing the trunk lid, insert the

master key and turn it counterclock-
wise to deactivate the lock release
lever.

After closing the trunk lid, try pulling it up

to make sure it is securely closed.

Hood

To open the hood:

1. Pull the hood lock release lever. The

hood will spring up slightly.

CAUTION

Before driving, be sure that the hood
is closed and securely locked. Other-
wise, the hood may open unexpected-
ly while driving and an accident may
occur.

—Luggage security system
(coupe only)

Summary of Contents for PASEO 1999
























































































































































































































Search results

Summary of Contents for PASEO 1999

Reviews:

Related manuals for PASEO 1999

Brands by name

Popular brands

Toyota PASEO 1999, Owner'S Manual

Search results

Summary of Contents for PASEO 1999

Reviews:

Related manuals for PASEO 1999

Brands by name

Popular brands