Toyota PASEO 1999 Owner'S Manual Download Page 40

Page: 40 / 215

’99 MY PASEO (U)

Too high

Take up slack

Keep as low on

hips as possible

Adjust the position of the lap and
shoulder belts.

Position the lap belt as low as possible

on your hips—not on your waist, then ad-

just it to a snug fit by pulling the shoulder

portion upward through the latch plate.

CAUTION

High−positioned lap belts and
loose−fitting belts both could cause
serious injuries due to sliding un-
der the lap belt during a collision
or other unintended result. Keep
the lap belt positioned as low on
hips as possible.

For your safety, do not place the
shoulder belt under your arm.

To release the belt, press the buckle−re-
lease button and allow the belt to re-
tract.

If the belt does not retract smoothly, pull

it out and check for kinks or twists. Then

make sure it remains untwisted as it re-

tracts.

Summary of Contents for PASEO 1999
























































































































































































































Search results

Summary of Contents for PASEO 1999

Reviews:

Toyota PASEO 1999, Owner'S Manual, Page: 40 / 215

Search results

Summary of Contents for PASEO 1999

Reviews: