Toyota PASEO 1999 Owner'S Manual Download Page 82

Page: 82 / 215

’99 MY PASEO (U)

Odometer and trip meter

These meters show the running dis-
tance.

1. Odometer—It shows the total distance

the vehicle has been driven.

2. Trip meter—It shows the distance driv-

en since the last time it was set to

zero. The black digits on white indicate

tenths of kilometers or miles.

3. Trip meter reset knob—It resets the

trip meter to zero.

To reset the trip meter, push the knob.

(c)

Fasten front

passenger’s seat

belt.

(b)

Fasten driver’s

seat belt.

(d)

Stop and check.

If the indicator or

buzzer comes on...

(a)

If parking brake is

off, stop and check.

(e)

Stop and check.

(f)

Take vehicle to

Toyota dealer.

(indicator and buzzer)

(type A)

(type B)

(indicator and buzzer)

Do this.

(j)

Take vehicle to

Toyota dealer

immediately.

(h)

Take vehicle to

Toyota dealer.

(k)

Turn off lights.

(l)

Remove key.

(i)

Close all doors.

(type A)

(type B)

(g)

Fill up tank.

If the indicator or

buzzer comes on...

Do this.

Light reminder

buzzer

Key reminder

buzzer

Service reminder indicators
and warning buzzers

Summary of Contents for PASEO 1999
























































































































































































































Search results

Summary of Contents for PASEO 1999

Reviews:

Related manuals for PASEO 1999

Brands by name

Popular brands

Toyota PASEO 1999, Owner'S Manual

Search results

Summary of Contents for PASEO 1999

Reviews:

Related manuals for PASEO 1999

Brands by name

Popular brands