Toyota PASEO 1999 Owner'S Manual Download Page 37

Page: 37 / 215

’99 MY PASEO (U)

CAUTION

When returning the seatback to the
upright position:

Make sure the seat belts are not
twisted or caught in the seatback
and are arranged in their proper
position and are ready to use.

Make sure the seatback is securely
locked by pushing forward and rear-
ward on the top of the seatback.

Head restraints

For your safety and comfort, adjust the
head restraint before driving.

To raise: Pull it up.

To lower: Push it down while pressing the

lock release button.
The head restraint is most effective when

it is close to your head. Therefore, using

a cushion on the seatback is not recom-

mended.

CAUTION

Adjust the center of the head re-
straint so that it is closest to the
top of your ears.

After adjusting the head restraint,
make sure it is locked in position.

Do not drive with the head re-
straints removed.

Summary of Contents for PASEO 1999
























































































































































































































Search results

Summary of Contents for PASEO 1999

Reviews:

Related manuals for PASEO 1999

Brands by name

Popular brands

Toyota PASEO 1999, Owner'S Manual

Search results

Summary of Contents for PASEO 1999

Reviews:

Related manuals for PASEO 1999

Brands by name

Popular brands