Toyota PASEO 1999 Owner'S Manual Download Page 71

Page: 71 / 215

’99 MY PASEO (U)

Outside rear view mirrors—

Adjust the mirror so that you can see
the side of your vehicle in the mirror.

Be careful when judging the size or dis-

tance of any object seen in the outside

rear view mirror on the passenger’s side.

It is a convex mirror with a curved sur-

face. Any object seen in a convex mirror

will look smaller and farther away than

when seen in a flat mirror.

CAUTION

Do not adjust the mirror while the
vehicle is moving. It may cause the
driver to mishandle the vehicle and
an accident may occur resulting in
personal injuries.

To adjust the rear view mirror, simply
operate the control lever.

NOTICE

If ice should jam the mirror, do not
operate the control or scrape the mir-
ror face. Use a spray de−icer to free
the mirror.

—Rear view mirror remote
control

Summary of Contents for PASEO 1999
























































































































































































































Search results

Summary of Contents for PASEO 1999

Reviews:

Toyota PASEO 1999, Owner'S Manual, Page: 71 / 215

Search results

Summary of Contents for PASEO 1999

Reviews: