Toyota PASEO 1999 Owner'S Manual Download Page 14

Page: 14 / 215

’99 MY PASEO (U)

Part 1
OPERATION OF
INSTRUMENTS AND
CONTROLS—

Chapter 1−2
Keys and Doors

Keys

Theft deterrent system

Keys

Your vehicle is supplied with two kinds
of key.

1. Master key—This key works in every

lock.

2. Sub key—This key is for side doors.

To protect things locked in the glove box

and trunk when you have your vehicle

parked, leave the sub key with the atten-

dant.
Since the doors and trunk lid can be

locked without a key, you should always

carry a spare master key in case you

accidentally lock your keys inside the ve-

hicle.

KEY NUMBER PLATE

Your key number is shown on the plate.
Keep the plate in a safe place such as
your wallet, not in the vehicle.

If you should lose your keys or if you

need additional keys, duplicates can be

made by a Toyota dealer using the key

number.
We recommend you to write down the key

number and keep it in safe place.

Summary of Contents for PASEO 1999
























































































































































































































Search results

Summary of Contents for PASEO 1999

Reviews:

Toyota PASEO 1999, Owner'S Manual, Page: 14 / 215

Search results

Summary of Contents for PASEO 1999

Reviews: