Toyota PASEO 1999 Owner'S Manual Download Page 114

Page: 114 / 215

’99 MY PASEO (U)

107

Fan speed selector

Move the lever to adjust the fan speed—

to the right to increase, to the left to

decrease.

Temperature selector

Turn the knob to adjust the temperature—

to the right to warm, to the left to cool.

Air flow selector

Turn the knob to select the vents used for

air flow.

1. Panel—

Air flows mainly from the

instrument panel vents.

2. Bi−level—

Air flows from both the floor

vents and the instrument panel vents.

3. Floor—

Air flows mainly from the floor

vents.

4. Floor/Windshield—

Air flows mainly

from the floor vents and windshield

vents.

5. Windshield—

Air flows mainly from the

windshield vents.

For details about air flow selector settings,

see the illustration after ”A/C” button.
Vehicles with ”A/C” button—Turning the Air

Flow Selector to windshield position turns

on the defroster to clear the front view

more quickly.

Summary of Contents for PASEO 1999
























































































































































































































Search results

Summary of Contents for PASEO 1999

Reviews:

Related manuals for PASEO 1999

Brands by name

Popular brands

Toyota PASEO 1999, Owner'S Manual

Search results

Summary of Contents for PASEO 1999

Reviews:

Related manuals for PASEO 1999

Brands by name

Popular brands