Toyota Highlander guide Owner'S Manual Download Page 71

Page: 71 / 499

1-2. Theft deterrent system

Fo
r s
afe
ty a

nd
se
cu
rity

HIGHLANDER_AE (OM48F11E)

■

System maintenance

The vehicle has a maintenance-free type engine immobilizer system.

■

Conditions that may cause the system to malfunction

●

If the grip portion of the key is in contact with a metallic object

●

If the key is in close proximity to or touching a key to the security system
(key with a built-in transponder chip) of another vehicle

NOTICE

■

To ensure the system operates correctly

Do not modify or remove the system. If modified or removed, the proper
operation of the system cannot be guaranteed.

NOT FOR REPRODUCTION

Summary of Contents for Highlander guide




















































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands

Toyota Highlander guide, Owner'S Manual

Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands