Toyota Highlander guide Owner'S Manual Download Page 256

Page: 256 / 499

254

4-5. Using the driving support systems

HIGHLANDER_AE (OM48F11E)

The slip indicator light will flash
while the TRC/VSC systems are
operating.

If the vehicle gets stuck in mud, dirt or snow, the TRC system may

reduce power from the engine to the wheels. Pressing

to turn the

system off may make it easier for you to rock the vehicle in order to
free it.

To turn the TRC system off,

quickly press and release

The “TRC OFF” will be shown on
the multi-information display. Press

again to turn the system back

on.

When the TRC/VSC systems are operating

Disabling the TRC system

NOT FOR REPRODUCTION

Summary of Contents for Highlander guide




















































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands

Toyota Highlander guide, Owner'S Manual

Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands