Toyota Highlander guide Owner'S Manual Download Page 197

Page: 197 / 499

195

4-2. Driving procedures

HIGHLANDER_AE (OM48F11E)

riv

Stop the vehicle.

Shift the shift lever to P.

Set the parking brake. (

→

P. 206)

Press the engine switch.

Release brake pedal and check that “ACCESSORY” or “IGNITION
ON” on the multi-information display is off.

Modes can be changed by pressing the engine switch with brake
pedal released. (The mode changes each time the switch is pressed.)

Off*

The emergency flashers can be
used.

The multi-information display will
not be displayed.

ACCESSORY mode

Some electrical components such
as the power outlet can be used.

“ACCESSORY” will be displayed
on the multi-information display.

IGNITION ON mode

All electrical components can be
used.

“IGNITION ON” will be displayed on the multi-information display.

: If the shift lever is in a position other than P when turning off the engine,

the engine switch will be turned to ACCESSORY mode, not to off.

Stopping the engine

Changing engine switch modes

NOT FOR REPRODUCTION

Summary of Contents for Highlander guide




















































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands

Toyota Highlander guide, Owner'S Manual

Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands