Toyota Highlander guide Owner'S Manual Download Page 414

Page: 414 / 499

412

7-2. Steps to take in an emergency

HIGHLANDER_AE (OM48F11E)

■

Messages displays

The message illustrations used are intended as examples, and may differ
from the image that is actually displayed on the multi-information display.

■

Warning message in dynamic radar cruise control mode (if equipped)

In the following situations, the warning message may not be displayed even if
vehicle-to-vehicle distance decreases:

●

When your vehicle and the vehicle ahead are traveling at the same speed or
the vehicle ahead is traveling more quickly than your vehicle

●

When the vehicle ahead is traveling at a very low speed

●

Immediately after cruise control speed is set

●

At the instant the accelerator pedal is depressed

■

The LDA (Lane Departure Alert) lane departure warning function (if
equipped)

In the following situations, a warning message will not be displayed even if a
lane line is crossed.

●

When the vehicle speed deviates from the operating range of the LDA sys-
tem functions

●

When the lane lines cannot be recognized

■

Warning buzzer

→

P. 400

Color display only

(If equipped)

Indicates that, since the VSC (Vehicle Stability
Control) system was turned off, the pre-crash
brake system operation is stopped

→

Turn the VSC on. (

→

P. 255)

Color display only

(If equipped)

Indicates that the PCS (Pre-Crash Safety sys-
tem) is not currently functional because the grille
cover or the sensor is dirty

→

Check the grille cover and the sensor and
clean them if they are dirty.

Warning message

Details/Actions

(Flashes)

NOT FOR REPRODUCTION

Summary of Contents for Highlander guide




















































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands

Toyota Highlander guide, Owner'S Manual

Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands