Toyota Highlander guide Owner'S Manual Download Page 110

Page: 110 / 499

108

3-2. Opening, closing and locking the doors

HIGHLANDER_AE (OM48F11E)

◆

Door lock switch

Locks all the doors

Unlocks all the doors

◆

Inside lock buttons

Locks the doors

Unlocks the doors

The driver's door can be opened
by pulling the inside handle
even if the lock button is in the
lock position.

Move the inside lock button to the lock position.

Close the door while pulling the door handle.

Vehicles without a smart entry & start system

The door cannot be locked if the key is in the engine switch.

Vehicles with a smart entry & start system

The door cannot be locked if the engine switch is in ACCESSORY or
IGNITION ON mode, or the electronic key is left inside the vehicle.

The key may not be detected correctly and the door may be locked.

Unlocking and locking the doors from the inside

Locking the front doors from the outside without a key

NOT FOR REPRODUCTION

Summary of Contents for Highlander guide




















































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands

Toyota Highlander guide, Owner'S Manual

Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands