Toyota Highlander guide Owner'S Manual Download Page 119

Page: 119 / 499

117

3-2. Opening, closing and locking the doors

HIGHLANDER_AE (OM48F11E)

pe
rati
on
of e

ac
h c
om
pon

ent

■

If the back door opener is inoperative

The back door can be unlocked from the inside.

Move the lever for the back door motor.

■

The power back door can be operated when (vehicles with a power back
door)

The power back door main switch is turned on and the glass hatch is closed.

■

The power back door can be opened when (vehicles with a power back
door)

●

The engine switch is in IGNITION ON mode and the shift lever is in P.

●

The engine switch is in ACCESSORY mode or off.

■

Back door closer (vehicles with a power back door)

In the event that the back door is left slightly open, the back door closer will
automatically close it to the fully closed position.

●

The back door closer will operate regardless of the engine switch mode.

●

The back door can be opened while the back door closer is operating by
pressing the back door opener button.

Remove the cover on the back door
trim.

Use a cloth to prevent scratches.

Vehicles without a power back door

Vehicles with a power back door

NOT FOR REPRODUCTION

Summary of Contents for Highlander guide




















































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands

Toyota Highlander guide, Owner'S Manual

Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands